Product · XT-TREE

XT-TREE

Wireless Soil Conditions Sensor For Trees

A long-probe sensor designed to be buried down to 150 cm — at the root depth of the trees it monitors. The XT-TREE reads moisture, temperature and light from the depth that actually matters for tree health.

Tentacles IoT XT-TREE wireless soil conditions sensor for trees
Measurements

Moisture Where The Roots Are

Surface readings lie — most tree roots live well below the topsoil. The XT-TREE is entrenched near the desired root depth, so its VWC reading reflects the water actually available to the tree rather than the water evaporating from the surface.

VWC At Root Depth

Volumetric Water Content measured where the tree drinks, not where the sun dries. Up to 150 cm installation depth.

Substrate Temperature

−20 to +65 °C ±2 %. Root-zone temperature drives phenology and stress — the data needed to plan irrigation and planting.

Ambient Light

0 – 150 000 lux ±5 %. Canopy closure and shade patterns become measurable per tree position.

Hybrid Radio

Sigfox 0G plus LoRaWAN (Helium, Netmore). Data reaches the dashboard from remote plots without on-site gateways.

Long Probe

Designed for permanent installation next to the root ball, with the antenna above ground for reliable transmission.

Self-Learning Calibration

Patent-pending substrate-fingerprinted calibration tunes each sensor to its actual soil.

Where It Works

Where It Fits

Urban Trees

Street trees in pits and tree lawns. A buried sensor survives foot traffic, dogs and street cleaning while reporting the water the tree actually gets.

Parks & Avenues

Tree rows along avenues and in parks where individual water needs vary by species, age and soil profile.

New Plantings

Monitor establishment success over the first critical seasons — quantify when a tree is drinking and when irrigation is failing.

Open Field Orchards

Older orchards and tree nurseries where root depth makes surface readings unreliable.

Specifications

Technical Details

Download PDF

Body dimensions

66 × 42 × 22 mm (H × W × D, without probes)

Installation depth

Up to 150 cm

Moisture zones

4 depth layers (Substrate moisture VWC)

VWC range

0 – 100 % (min 0.4 % depending on substrate texture and insertion)

Substrate temperature

−20 to +65 °C, ±2 %

Light

0 – 150 000 lux, ±5 %

Sampling rate

Configurable 5 minutes – 4 hours (battery saving)

Measurement configuration

Sampling rate, sensor usage, measurement accumulation

Configuration gate

admin.mytentacles.com

Data access

dashboard.mytentacles.com

Configurable webhook

admin.mytentacles.com

Battery life

Up to 15 years (depends on sampling and message rate)

Antenna

Omni Whip, detachable

Operating temperature

+5 to +65 °C

Use in

Open field

Why XT-TREE

Built For The Long Run

Buried Up To 150 cm

Reach the root zone of mature trees. The probe stays in place; only the antenna pokes above the surface.

Plug & Play

No gateways, no replaceable parts, no cables. Bury it, walk away, check the dashboard.

15-Year Battery

Sealed, fixed battery designed for the long horizons of tree care — install once and forget.

Hybrid Radio

Sigfox 0G plus LoRaWAN (Helium, Netmore). No gateway, no IT, works in remote urban and rural plots.

In Detail

Sensor Anatomy

XT-TREE sensor with single long-depth probe and fixed antenna

Detail 01

Single long-depth probe designed for permanent buried installation at the root zone. The fixed antenna stays above ground for reliable transmission — no cables, no detachable parts.

XT-TREE probe installed at the root zone of a tree

Detail 02

Optimized probe profile for maximal precision.

Order Direct

Available Through Our Partners

Get Started

Caring For Trees That Outlive The Sensor?

Trees need decades of care; the XT-TREE is built to give you the data without adding to the maintenance load. Talk to our team about coverage and distributor options for your region.

Made with AI in Macaly